Can i paint muffler

Use the required spanners and screw drivers if necessary, to dismantle the exhaust pipe from the motorcycle.

Use different sand paper sheets to remove this rust from the chrome plated surface of the exhaust. Once you have removed the rust and brought back the shining on the surface, it is time to clean the exhaust from the grease and wax. Use a grease remover to clean the exhaust pipe. You would want a clean and neat pipe before you start spraying the paint. There are many ways to spray painting a component. However, we find it easier if you tie the exhaust on a rope where it is freely hanging.

Tie one end of the rope to exhaust and the other end to somewhere wherein the pipe has room to breather. The exhaust should be able to rotate freely. You can easily spray the exhaust with a free hanging one than if you restrict the movement. Make sure both the primer and painting you are buying for the exhaust should be high temperature paints. That is, the paint should withstand high temperatures.

Regular paints wont work for exhaust as they would come off when faced with high temperatures due to the heat coming through the exhaust gases. Once you have bought the right type of primer and paint, all you got to do now is spray them. Start with the primer. Spray it on the exhaust pipe and make sure all the intricate parts are coated as well. Once you have sprayed the primer on the exhaust pipe, it is time for drying out.

Provide sufficient time to dry out before you start spraying paint. A sufficient time can be somewhere between half an hour to two hours depending on the weather out there. We suggest one-hour time frame as we feel that provides more than enough time for the primer to dry it out.

Once the primer has dried on the exhaust surface, it is now time for the main course. Spraying the paint. So, spray the paint all over the exhaust. Make sure the paint coating is thick. Before you start to spray paint, find a suitable place to complete the task.

A place with excellent ventilation and a dust-free environment is good for completing your project effectively. Once you find a suitable place, simply spread out a drop cloth to protect it from spray paint. Gather all the material you will need to do the job. Below mentioned are the things that you will require to complete this task, take a look. No matter what type of painting you are going to do, preparing the vehicle is essential to get the optimum results.

To do the needful, first clean the exhaust pipe of your car using a liberal coat of Rust-Oleum Wax and Tar Remover over the entire are and then leave it for one minute. Afterward, use a lint-free cloth to wipe it away. Primer ensures excellent adhesion of paint on the surface and offers better protection to the surface being painted.

To prime, the exhaust, shake the spray-cane of Rust-Oleum High Heat Primer for one minute and make sure that the mixing ball starts to rattle. Apply light coats with a few minutes of gap between each coat. Once it is dry, apply another coat of paint lightly and evenly across the surface.

Repeat this step until you have three to four coats of paint. Two hours after you finish painting, run the engine for 10 minutes, shut it off for 10 minutes, and then drive for 20 minutes.

After that, shut the car off for 20 minutes. Then, drive the vehicle until it reaches operating temperature. Once it reaches operating temperature, shut it off, and let the paint dry the rest of the way. This step allows the paint to set completely onto your exhaust pipe. An exhaust pipe can heat up several hundred degrees, so it is essential to paint it with high-heat paint.

Be sure whatever paint you select is rated to handle , degrees Fahrenheit so that it can withstand the heat. Rust-oleum high heat paint will withstand temperatures up to 1, degrees Fahrenheit. For this reason, it is an excellent option for your exhaust pipe.

In addition, Rust-Oleum also acts as a protective layer that will keep rust away. Krylon automotive high-heat paint is designed to last in temperatures up to 1, degrees Fahrenheit. Plus, it comes in 15 different colors.

POR is heat-resistant paint and can withstand temperatures up to 1, degrees Fahrenheit. This paint is resistant to cracking and chipping as well as weather and salt. If your exhaust pipes are turning blue, it could be a sign that they are too hot. When exhaust pipes get too hot, the outside layer of metal will oxidize. As a result, it will create that blue color. Any time your exhaust pipe is getting too hot, you will want to figure out why.

Some things that can cause your exhaust pipe to heat up are:. If you have a lean air-fuel mixture, which means you how a low amount of fuel to air in your engine, you may want to check your carburetor, as that is most likely to be the culprit. Any time your car is producing excess heat, you should have it checked out by a mechanic. Another cause of bluing is a leak in the exhaust system.

This problem could cause extreme heat to flow through the system. For this reason, if you expect a leak in your exhaust system, see a mechanic right away. If the exhaust pipe is made of certain materials, it will turn blue easier.